HI98303P is rugged and reliable pocket-sized testers that offer quick and accurate reading of Conductivity. HI98303P has manual calibration facility and it can measure conductivity upto 1999 μS/cm
- Graphite electrodes
- ATC
- Simple one point calibration
- Easy to use
- Economical
Conductivity tester with ATC, 1999 μS/cm
The DiST® family of testers is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry.
HI98303P can measure EC upto 1999 μS/cm
These testers feature an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of EC/TDS is based on Ohm’s Law, I = V/R where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface which will affect accuracy. The DiST’s non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results.
When calibration is necessary, simply submerge the electrode tip into calibration solution (1413 μS/cm) and adjust the trimmer on the side of the tester.
SKU HI98303P Product Name Conductivity tester with ATC, 1999 μS/cm - HI98303P Stock Status Message Ships within 24 hours (In Business Days) Quote Required No EC Range 0 to 1999 μS/cm EC Resolution 1 μS/cm EC Accuracy ±2% F.S. EC Calibration manual, one point EC/TDS Temperature Compensation automatic, 0 to 50°C (32 to 122°F) Cell Type amperometric graphite EC/TDS Probe amperometric graphite electrode Battery Type/Life 4 x 1.5V alkaline / approximately 200 hours of continuous use Environment 0 to 50°C (32 to 122°F); RH max 95% Dimensions 175 x 41 x 23 mm (6.9 x 1.6 x 0.9’’) Weight 95 g (3.4 oz.) Ordering Information HI 98303P (DiST®3) is supplied with protective cap, screwdriver, batteries and instructions Hsn Code 90275090